DCD

1-1/4" Vibratory Plow Grip

This product is specifically designed for installation of PVC or PE duct by vibratory plow and is particularly suited to agricultural applications because of its quick installation and...

Breakaway Wire Kit 40 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

1-3/8" Dia. Connector Body

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Breakaway Pin Kit 4,700 Lb / 40.0 Kn 14/kit

Breakaway pin kit for DCD 00560-280 series breakaway connector. Kit of 17 pins. The following table provides several suggestions for different pin configurations in the 00560-280S Breakaway...

Dub Breakaway Connector 3-3/4" Diameter, Marine Grade

Breakaway Pin Kit 450 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

90mm Sealed Duct Puller

These Duct Pullers are the same as the 00650 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to install polyethylene ducting using expanding...

Duct Puller 4" Duct (P/N 00616-400)

Duct Sleeve 1-1/4" Duct

Breakaway Wire Kit 65 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

2" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Duct Puller 90 mm Duct

These Duct Pullers are the same as the 00620 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to grip polyethylene ducting using expanding jaws...