DCD

Duct Puller 10" Duct Sdr 15.5 - 17

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

Anchor Shackle 5/16" Bolt Type Swl 1,500 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Duct Sleeve 4" Duct

Eye To Eye Connector Nom. Size: 5/8" Swl 5,200 Lb

Eye to Eye/Clevis Connectors These connectors are the standard chain swivel used in many applications. The two halves will not rotate under load, but are useful for aligning products. They are forged...

Breakaway Wire Kit 80 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

Breakaway Pin Kit 400 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Breakaway Pin Kit 3,500 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Duct Sleeve 160 Mm Duct

Dub-wise Puller 5" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent...

Dub Break-away Connector 6-1/2" Dia., Marine Grade

Anchor Shackle 5/16" Screw Pin Type Swl 1,500 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Rope-swivel Connector - 7,000 lb, 7/8" rope max, w/o sheave

This product is used to connect a swivel to pulling rope. The entire product, including sheave, is manufactured from stainless steel. Replacement sheaves are available by contacting Customer...