DCD

Duct Sleeve 63 Mm Duct

Clevis Pin Kit Maxi DUB-Swivel 500 Ton 1 Pin/Kit

Anchor Shackle 7/8" Screw Pin Type Swl 13,000 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Duct Plugger Kit 160 Mm Duct

6" Polyurethane Duct Puller

Breakaway Pin Kit 8,000 lb / 35.6 kN 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

2" Dia. Connector Body

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Breakaway Pin Kit 400 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Breakaway Wire Kit 185 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

Duct Puller 12" Sdr 9 Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

Duct Puller 1-1/4" Duct (P/N 00616-125)

Duct Puller 2-1/2" Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...