DCD

Dub-wise Puller 3" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent...

Driving Tool For Lug Style Pullers

Eye To Eye Connector Nom. Size: 1/2" Swl 3,600 Lb

Eye to Eye/Clevis Connectors These connectors are the standard chain swivel used in many applications. The two halves will not rotate under load, but are useful for aligning products. They are forged...

Anchor Shackle 5/8" Screw Pin Type Swl 6,500 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Rope-rope Connector - 25,000 lb, 7/8" rope max

This product is used to connect two ropes of up to 7/8” dia. The entire product, including sheaves, is manufactured from stainless steel. Replacement sheaves are available by...

75mm Sealed Duct Puller

These Duct Pullers are the same as the 00650 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to install polyethylene ducting using expanding...

Duct Plugger Kit 2-1/2" Duct

Duct Puller 8" Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

3-1/2" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Eye To Clevis Connector Nom. Size: 1/2" Swl 3,600 Lb

Eye to Eye/Clevis Connectors These connectors are the standard chain swivel used in many applications. The two halves will not rotate under load, but are useful for aligning products. They are forged...

40mm Sealed Duct Puller

These Duct Pullers are the same as the 00650 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to install polyethylene ducting using expanding...

Can-link Connector 1-1/4" Dia, 5,000 lb

The Can-Link™ Connector is used to connect two items with lugs or wire loop fittings. A common use is to connect a wire mesh grip to the pulling wire. The connectors are manufactured from...