DCD

Anchor Shackle 7/16" Bolt Type Swl 3,000 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Rope-swivel Connector - 25,000 lb, 7/8" rope max, w/o sheave

This product is used to connect a swivel to pulling rope. The entire product, including sheave, is manufactured from stainless steel. Replacement sheaves are available by contacting Customer...

Dub-wise Puller 1-1/4" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent...

Breakaway Pin Kit 500 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Duct Puller 200 mm Duct

These Duct Pullers are the same as the 00620 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to grip polyethylene ducting using expanding jaws...

Can-link Connector 1-1/2" Dia, 9,000 lb

The Can-Link™ Connector is used to connect two items with lugs or wire loop fittings. A common use is to connect a wire mesh grip to the pulling wire. The connectors are manufactured from...

Duct Plugger Kit 4" Duct

Breakaway Pin Kit 4000 lb, /kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Duct Sleeve 110 Mm Duct

Breakaway Pin Kit 800 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Breakaway Swivel 5/8" Diameter

Duct Plugger Kit 110 Mm Duct