All Products

Jameson 7/16" X 400' Rod Only, Traceable, Marked

DeWALT ToughSystem DS300 Large Case 1/EA

SOLID BODY SPIRAL FLUTED BACKREAMERS - 2-3/8″ Reg (Box x Box)

SOLID BODY SPIRAL FLUTED BACKREAMERS - 2" IF (Box x Box)

BLACK WIDOW Paddle Bit Ditch Witch® Compatible

STEEP TAPER BIT, For Rocky & Abrasive Soil

BLACK WIDOW Paddle Bit Vermeer® Compatible

STEEP TAPER BIT, For Rocky & Abrasive Soil

Swivel Head Innerduct Pulling Eye

Swivel Head Innerduct Pulling Eye The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the innerduct as it is installed. It eliminates...

Innerduct Eyes for Micro Duct

Innerduct Eyes for Micro Duct Tapered buttress threads into the micro duct for maximum pulling strength.

Fixed Head Innerduct Pulling Eye

Fixed Head Innerduct Pulling EyeTapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux swivel. When properly sized and installed, these eyes will not pull out of the innerduct until the...

Clevis Head Innerduct Pulling Eye

Clevis Head Innerduct Pulling Eye Same tapered threads as the standard innerduct pulling eye, these pulling eyes feature a slotted head with clevis pin to permit direct attachment to any Condux multiple pulling harness leg ends. When properly sized and...

Innerduct Swivel Clevis Style Pulling Eye

Innerduct Swivel Clevis Style Pulling Eye These products are similar to the 00604 and 00605 series, but incorporate a built-in swivel head. They should only be used to install innerduct and are not suitable for use in any kind of directional drilling...

Innerduct Clevis Style Pulling Eye

Innerduct Clevis Style Pulling Eyes The clevis style pulling eyes are better if attaching to a pulling rope or wire with an eye that can be slotted into the clevis and simply attached with the pin provided. These products are designed to...