DCD

Duct Puller Jaw Kit 10" Sdr 15.5 - 17 Duct 00620 Duct Puller

Breakaway Pin Kit 675 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Anchor Shackle 5/8" Bolt Type Swl 6,500 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Duct Puller 10" Sdr 11 Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

Breakaway Pin Kit 3600 lb, 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Breakaway Pin Kit 300 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Duct Puller 12" Sdr 17 Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

Breakaway Wire Pin and Ring Kit

Pin ring kit.

Wire Breakaway Swivel 7/8" Diameter, Marine grade stainless

This product is similar to our Wire Breakaway Connector (00531 series) as it protects the utility being installed from overload with the addition of a built-in swivel. Changing a wire takes just...

Breakaway Wire Kit 15 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

Breakaway Pin Kit 2,500 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Breakaway Pin Kit, Marine Grade, 800 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...