DCD

Breakaway Wire Kit 50 lb, 10/kit

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The...

6" x 5-13/16" Dia. Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Eye To Clevis Connector Nom. Size: 3/8" Swl 2,250 Lb

Eye to Eye/Clevis Connectors These connectors are the standard chain swivel used in many applications. The two halves will not rotate under load, but are useful for aligning products. They are forged...

4" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Rope-swivel Connector 30,000 lb

This product is used to connect a swivel to pulling rope. The entire product, including sheave, is manufactured from stainless steel. Replacement sheaves are available by contacting Customer...

Can-link Connector 2" Dia, 15,000 lb

The Can-Link™ Connector is used to connect two items with lugs or wire loop fittings. A common use is to connect a wire mesh grip to the pulling wire. The connectors are manufactured from...

Anchor Shackle 1/2" Bolt Type Swl 4,000 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the...

Rope-rope Connector (P/N 00521-035)

This product is used to connect two ropes of up to 7/8” dia. The entire product, including sheaves, is manufactured from stainless steel. Replacement sheaves are available by...

Dub-wise Puller 2" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent outer...

1-1/4" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Duct Plugger Kit 2" Duct

Breakaway Pin Kit 3,000 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...