All Products

PORCUPINE ROCK DRILLING BIT 4-1/4" Cut With 2.0" IF Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

SEQUOIA® ROCK DRILLING BIT With Dome Cutters 4" cut with 2.0" IF Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Ditch Witch® Compatible 5 bolt (12MM) 2-3/8" REG PIN, FOR 3-1/4" DIAMETER HOUSING

Sheave Hanger - Single 5"

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be noted that the handle at one end of the pin may be used...

CLOCKING MECHANISM End Load Rock Housing Transmitter Retaining Cap "O" Ring Set (2)

Support Grip - Stainless Steel 1.50" - 1.99" Dia (P/N 00831-150S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Pulling Grip 3.75" - 4.24" Dia (P/N 00671-095)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high tensile steel strands. Depending on the type of grip,...

Pulling Grip 3.00" - 3.74" Dia (P/N 00675-080)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high tensile steel strands. Depending on the type of grip,...

DRIVE CHUCK DITCH WITCH ® COMPATIBLE Fits JT1220M1, 1.47-4 THD

Support Grip 3.00" - 3.49" Dia (P/N 00811-299)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip - Stainless Steel 3.13" - 3.74" Dia (P/N 00831-315S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Transmitter Housing Vermeer® Compatible 3.250" Dia., Box x Box Side Load Housing, 2.375" REG x 2.375" REG