All Products

PORCUPINE EXTREME ROCK DRILLING BIT 5-1/4" Cut With 2-3/8" API REG Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear...

Pulling Grip 1.13" - 1.49" Dia (P/N 00678-030)

Double Weave, Single Eye, Slack Grip, Split Mesh (Lace-up) Similar to the 00674/00675, these grips offer an offset eye and double weave wire for offset or mid-span pulls. Use the laced, split-mesh...

Support Grip 0.50" - 0.62" Dia (P/N 00802-051)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 4.25" Dia. Hi-Flow, 2-7/8" API REG x 2-7/8" IF

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 3.625" Dia. Hi-Flow, 2-3/8" API REG x 2-3/8" IF

Pulling Grip 1.50" - 1.99" Dia (P/N 00682-038)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high...

Support Grip - Stainless Steel 0.50" - 0.62" Dia (P/N 00812-051S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

SOLID BODY SPIRAL FLUTED BACKREAMERS 6" Cut x 4.5" Pack, 2.125" Spline (Box) x Pull Tab with Rotary Teeth TRIHAWK® Compatible

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Vermeer® Compatible 6 bolt (5/8" - 11) 3-1/2" REG PIN, FOR 4-1/2" DIAMETER HOUSING

DIRT SUBS FOR TRIHAWK® COMPATIBLE TRANSMITTER HOUSING(Blade Adapters) Ditch Witch® Compatible 5 bolt (12mm) 2.125" Spline (Box)

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 7.00" Dia. Hi-Flow, 4-1/2" API REG x 5-1/2" DSFH

Support Grip 0.75" - 1.12" Dia (P/N 00830-079)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...