All Products

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Vermeer® Compatible 6 bolt (5/8" - 11) 2-7/8" REG PIN, FOR 4" DIAMETER HOUSING

PORCUPINE EXTREME ROCK DRILLING BIT 5.4" Cut With 2.5" spline TRIHAWK® Compatible

Lace-up Pulling Grip 2.00" - 2.49" Dia

Double Weave, Single Eye, Slack Grip, Split Mesh (Lace-up) Similar to the 00674/00675, these grips offer an offset eye and double weave wire for offset or mid-span pulls. Use the laced, split-mesh grips if the end of the cable is not available or the...

Double Weave, Single Eye, Shoulder Pulling Grip 2.50" - 2.99" Dia

Double Weave, Single Eye, Shoulders These grips offer a flexible eye with shoulders and double weave galvanized wire construction. The shoulders offer added protection to the utility being pulled in as well as protecting the leading wire strands.

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Vermeer® Compatible 6 bolt (1/2" - 13) 2-3/8" REG PIN, FOR 3-1/4" DIAMETER HOUSING

Hanger - Double (P/N 32810-800)

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be noted that the handle at one end of the pin may be used...

Support Grip 1.75" - 1.99" Dia (P/N 00801-173)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Pulling Grip 0.25" - 0.49" Dia (P/N 00682-006)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high tensile steel strands. Depending on the type of grip,...

Support Grip - Stainless Steel 0.63" - 0.74" Dia (P/N 00802-063S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip - Stainless Steel 1.50" - 1.99" Dia (P/N 00821-150S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

SEQUOIA® ROCK DRILLING BIT With Dome Cutters 7" cut with 3-1/2" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Ditch Witch® Compatible 6 bolt (16MM) 2-3/8" REG PIN, FOR 3-1/4" DIAMETER HOUSING