All Products

Lace-up Pulling Grip 0.75" - 1.12" Dia

Double Weave, Single Eye, Slack Grip, Split Mesh (Lace-up) Similar to the 00674/00675, these grips offer an offset eye and double weave wire for offset or mid-span pulls. Use the laced, split-mesh grips if the end of the cable is not available or the...

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 3.625" Dia. Hi-Flow, 2-3/8" API REG x 2-3/8" API REG

WINGED BACKREAMER 18" Cut x 16.5" Pack, 3.25" Shaft Diameter, 2-3/8" REG x 15T Pulling Eye (Box x Pulling Eye) w/ Shark Teeth

A "Spider" center support and stabilizer ring are standard on 18" and larger reamers

Type 1 Pin Kit (P/N 00508-P500)

Sold Per 1 Each DCD 00508-P500 Type 1 Pin Kit Product Information: Pin Number: 00508-P500 Allen Key Size: 00101-625 (5/8") Type 1: 00508-1500, 00508-1501

Support Grip - Stainless Steel 2.00" - 2.49" Dia (P/N 00812-197S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

SEQUOIA® ROCK DRILLING BIT With Angle Cutters 4" cut with 2-3/8" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

Support Grip - Stainless Steel 1.00" - 1.24" Dia (P/N 00810-098S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip 1.25" - 1.49" Dia (P/N 00811-118)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Sheave Hanger - Single 6"

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be noted that the handle at one end of the pin may be used...

SEQUOIA® ROCK DRILLING BIT With Chisel Cutters 5" cut with 2.5" spline TRIHAWK® Compatible

Support Grip - Stainless Steel 2.50" - 3.12" Dia (P/N 00831-256S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

1-1/4" Pest Duct Puller