All Products

SEQUOIA® ROCK DRILLING BIT With Dome Cutters 4" cut with 2-3/8" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

AMERICAN HDD® Tail Piece (Housing Savers)/Adaptor 2.125 LPT (Pin) x #600 Firestick (Pin) with HD 5/8" bolt

Pulling Grip 2.50" - 2.99" Dia (P/N 00679-065)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high tensile steel strands. Depending on the type of grip,...

SEQUOIA® ROCK DRILLING BIT With Chisel Cutters 6" cut with 2.5" spline TRIHAWK® Compatible

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Vermeer® Compatible 6 bolt (1/2" - 13) 2" IF PIN, FOR 3-1/4" DIAMETER HOUSING

Support Grip 1.50" - 1.99" Dia (P/N 00820-157)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip 2.50" - 2.99" Dia (P/N 00810-252)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 6.375" Dia. Hi-Flow, 4-1/2" API REG x 4-1/2" IF

Support Grip 1.00" - 1.24" Dia (P/N 00802-098)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip 0.75" - 0.99" Dia (P/N 00802-079)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

Support Grip 0.75" - 0.99" Dia (P/N 00801-079)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections and fixtures. DCD grips are manufactured of durable...

STACKED PLATE SPIRAL FLUTED BACKREAMERS 14" Cut x 12" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box) x 15T Swivel w/ Conical Teeth