All Products

STACKED PLATE SPIRAL FLUTED BACKREAMERS 14" Cut x 12" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box) x 15T Swivel w/ Conical Teeth

Sheave - Double Hanger 8" Wide x 11" Diameter (P/N 32100-811F)

DCD offers single or double hangers to go with their series of cast aluminum sheaves. The single hangers are provided with a safety hook and the double hangers have one hook and one pin through which...

Pulling Grip 0.75" - 1.12" Dia (P/N 00678-020)

Double Weave, Single Eye, Slack Grip, Split Mesh (Lace-up) Similar to the 00674/00675, these grips offer an offset eye and double weave wire for offset or mid-span pulls. Use the laced, split-mesh...

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 3.625" Dia. Hi-Flow, 2-3/8" API REG x 2-3/8" API REG

WINGED BACKREAMER 18" Cut x 16.5" Pack, 3.25" Shaft Diameter, 2-3/8" REG x 15T Pulling Eye (Box x Pulling Eye) w/ Shark Teeth

A "Spider" center support and stabilizer ring are standard on 18" and larger reamers

Support Grip - Stainless Steel 2.00" - 2.49" Dia (P/N 00812-197S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

SEQUOIA® ROCK DRILLING BIT With Angle Cutters 4" cut with 2-3/8" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear...

Support Grip - Stainless Steel 1.00" - 1.24" Dia (P/N 00810-098S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Support Grip 1.25" - 1.49" Dia (P/N 00811-118)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Sheave Hanger - Single 6"

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be...

SEQUOIA® ROCK DRILLING BIT With Chisel Cutters 5" cut with 2.5" spline TRIHAWK® Compatible

Support Grip - Stainless Steel 2.50" - 3.12" Dia (P/N 00831-256S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...