All Products

Duct Puller 140 mm Duct

These Duct Pullers are the same as the 00620 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the...

7/8" Dia. Connector Body

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is constructed out of stainless steel and the polyurethane...

Duct Puller 6" Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and allows a maximum load to be applied without damage...

Duct Sleeve 2-1/2" Duct

Rope-swivel Connector - 15,000 lb, 7/8" rope max, w/o sheave

This product is used to connect a swivel to pulling rope. The entire product, including sheave, is manufactured from stainless steel. Replacement sheaves are available by contacting Customer Service. The sheaves run on standard DCD clevis pins,...

Breakaway Pin Kit 400 lb / 1.8 kN 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use of a breakaway connector to ensure the final...

Breakaway Pin Kit 1,200 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use of a breakaway connector to ensure the final...

Duct Puller 75 mm Duct

These Duct Pullers are the same as the 00620 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the...

Dub Breakaway Connector 3-3/4" Diameter

Duct Puller 110 mm Duct

These Duct Pullers are the same as the 00620 series, but are designed with jaws that allow sizing to metric duct sizes. These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the...

Breakaway Pin Kit 9,000 lb / 40.0 kN 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use of a breakaway connector to ensure the final...

Breakaway Pin Kit 1,500 lb / 6.6 kN 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use of a breakaway connector to ensure the final...