All Products

4" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is constructed out of stainless steel and the polyurethane...

Rope-swivel Connector - 25,000 lb, 7/8" rope max

This product is used to connect a swivel to pulling rope. The entire product, including sheave, is manufactured from stainless steel. Replacement sheaves are available by contacting Customer Service. The sheaves run on standard DCD clevis pins,...

Can-link Connector 2" Dia, 15,000 lb

The Can-Link™ Connector is used to connect two items with lugs or wire loop fittings. A common use is to connect a wire mesh grip to the pulling wire. The connectors are manufactured from high strength stainless steel with hardened clevis...

Rope-rope Connector - 15,000 lb, 7/8" rope max

This product is used to connect two ropes of up to 7/8” dia. The entire product, including sheaves, is manufactured from stainless steel. Replacement sheaves are available by contacting the customer service department. The sheaves...

Dub-wise Puller 2" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent outer sleeve on the puller. The outer sleeve also...

1-1/4" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is constructed out of stainless steel and the polyurethane...

Duct Plugger Kit 2" Duct

Breakaway Pin Kit 3,000 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use of a breakaway connector to ensure the final...

3" Polyurethane Duct Puller

Dub Breakaway Connector 2-1/2" Diameter

Breakaway Wire Kit 22lb - 120lb sampler kit, 3 wires/size

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The product is manufactured from stainless steel to...

Duct Plugger Kit 63 Mm Duct