All Products

Dub-wise Puller 2" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent outer...

1-1/4" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is constructed...

Duct Plugger Kit 2" Duct

Breakaway Pin Kit 3,000 Kg 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

3" Polyurethane Duct Puller

Anchor Shackle 3/16" Screw Pin Type Swl 670 Lb

These shackles provide a low cost, economical means of connecting two products together. They are available in two types: one with a bolt, nut and cotter pin for locking (00654 series), the other...

Dub Breakaway Connector 2-1/2" Diameter

These products are designed to protect polyethylene ducting from overload during installation by directional drilling and are used between the pullback swivel and the duct puller. The connectors are...

Breakaway Wire Kit 22lb - 120lb sampler kit, 3 wires/size

This connector uses a wire instead of a pin to achieve the smallest of break loads. The two-piece design ensures you don’t lose parts of your connector when separation does occur. The product is...

Duct Plugger Kit 63 Mm Duct

Duct Sleeve 40 Mm Duct

Breakaway Pin Kit 1,000 lb / 4.4 kN 5/kit

Breakaway Pin Kits are sold separately in packs of 5

Duct Puller 50mm Duct