Slingco

Slingco ZCS10389 - 1" NPT Dust Tight 0.70-0.97" 304 SS Wire, 0.70 - 0.97 in (17.8 24.6 mm)

Dust-Tight Cord Grips provide strain relief and bend support for cables running into machinery and connection boxes. Select the deluxe grip that fits the NPT size being connected to. Available with...

Slingco SWI2748 - Hex Pin for ZSW2857, 0 in (0 mm)

Slingco ZCS2849 - Thimble Offset Eye Heavy Duty 316 SS, 1.20 - 1.58 in (30 - 40 mm)

Slingco has developed a range of cable Grips tailored for the renewable energy sector for use in: cable installation – on-shore and off-shore cable support inside wind turbines cable managementFor...

WH2/WH3, 12 Ton Kearney Type Die - 747

WH2/WH3, 12 Ton Kearney Type Die - 747

Slingco ZCS2173 - Conduit Riser 2.5", 1.25 - 1.50 in (31 - 38 mm)

Conduit riser grips are designed to support cables within conduit. Designed to match standard conduit sizes. These grips come in single and double weave as indicated in the chart below. Also...

Slingco ZCS2844 - Thimble Offset Eye Heavy Duty 316 SS, 0.31 - 0.40 in (8 - 10 mm)

Slingco has developed a range of cable Grips tailored for the renewable energy sector for use in: cable installation – on-shore and off-shore cable support inside wind turbines cable managementFor...

Slingco ZCS0853 - Standard Grips -Double Eye Galvanized - Lace Up, 3.50 - 4.50 in (89-115 mm)

Ideal for pulling light to medium loads; the l-type is fitted to the cable being pulled by stitching it together, like a football. Mainly used where a ‘typical’ cable Grip can’t be fitted over a...

Slingco ZCS7095 - HD DBL EYE, SUP GRIP, 2.50-2.99", 304 SS, LACE, 2.50 - 3.00 in (63 - 76 mm)

Slingco ZCS7067 - Heavy Duty Single Eye Support Grip, 0.75 - 1.00 in (19 - 25 mm)

Heavy Duty support Grips made from stainless steel are perfect for supporting heavier cable, conduit or any other cylindrical object. often used by utilities and contractors to support cables...

Slingco ZCS09968 - Bus Drop Support Grip ALL 316 SS, 0.41 - 0.56 in (10.9 - 14.2 mm)

These lightweight easy to use grips are perfect for supporting cables in such applications as Data Centers, Control Centers and other wiring to rack applications. Use these grips to support cables in...

Slingco ZCS2710 - Conduit Risers 3", 1.75 - 2.00 in (44 - 50 mm)

Conduit riser grips are designed to support cables within conduit. Designed to match standard conduit sizes. These grips come in single and double weave as indicated in the chart below. Also...

Slingco Triple Weave Underground Pulling Grip With Barbell 0.75" - 1.25" Diameter 24" Lattice length 1/EA

This line of grips are specially designed for underground applications. The eye is enclosed in an aluminum tube which provides added support when running within conduit and trenches. Plus these...