Slingco

Slingco CPC8744 - 201 SS Band, 3/4" x 0.76mm x 100 FT - In Red Plastic Carrier, 0 in (0 mm)

Slingco CPC2876 - Preformed Galv Bands 3/8" x 13/16" [100/box], 0 in (0 mm)

Slingco ZCS2847 - Thimble Offset Eye Heavy Duty 316 SS, 0.80 - 0.99 in (20 - 25 mm)

Slingco has developed a range of cable Grips tailored for the renewable energy sector for use in: cable installation – on-shore and off-shore cable support inside wind turbines cable managementFor...

Slingco ZCS7681 - 2" NPT Dust Tight Grip - INSULATED, 1.40 - 1.75 in (38.1 - 44.5 mm)

Dust-Tight Cord Grips provide strain relief and bend support for cables running into machinery and connection boxes. Select the deluxe grip that fits the NPT size being connected to. Available with...

Slingco ZSW2096 - Line Swivels - bright zinc plated steel, 10000 lb in (6000 lb mm)

Slingco Pole Puller - Deluxe consists of: hydraulic cylinder, chain, base weldment, swivel assembly PLUS back plate weldment, and pole puller pad.

Slingco ZCS7674 - 1/2" NPT Dust Tight Grip - INSULATED, 0.22 - 0.32 in (5.6 - 8.1 mm)

Dust-Tight Cord Grips provide strain relief and bend support for cables running into machinery and connection boxes. Select the deluxe grip that fits the NPT size being connected to. Available with...

Slingco ZCS2013 - Fiber Optic Grips, 0.64 - 0.88 in (16.3-22.4 mm)

Dual weave design from galvanized wire rope. used for the installation of fiber optic cables for either overhead or underground applications. Made of Galvanized Steel.

Slingco ZCS2701 - Conduit Risers 1.5", 1.00 - 1.25 in (25 - 31 mm)

Conduit riser grips are designed to support cables within conduit. Designed to match standard conduit sizes. These grips come in single and double weave as indicated in the chart below. Also...

Slingco ZCS5651 - Heavy Duty Hose Restraint- 316 SS, 1.5 - 2.5 in (38 - 63 mm)

Safety restraining system designed to prevent whipping in the event of a pressurized hose becoming detached from its fitting.

Slingco ZCS0324 - Standard Grips - Galvanized- Single Eye, 1.50 - 2.00 in (38-50 mm)

Ideal for pulling light to medium loads; typical application - 'standard pull' of single or group of cables.

Slingco ZCS2694 - Conduit Risers 1", 0.63 - .0.75 in (16 - 19 mm)

Conduit riser grips are designed to support cables within conduit. Designed to match standard conduit sizes. These grips come in single and double weave as indicated in the chart below. Also...