PROTO

PROTO Wr Comb Ratg 12Pt Fp 1/4

Proto Full Polish Combination Non-Reversible Ratcheting Wrench 1/4" - 12 Point.FeaturesFull polish finish provides corrosion resistance and easy to clean surfaces.12 point box end allows for fine...

PROTO Torque Wr Dial 3/8 Dr 50 Ft Lb

Proto 3/8" Drive Dial Torque Wrench 10-50 ft-lbs, 1.4-7 mkg.FeaturesDual scale (English/Metric) with clockwise and counterclockwise operation ” fewer wrenches needed to complete job.Industrial all...

PROTO Skt Bit 1/4 Dr T25 Torx

Proto 1/4" Drive Torx Bit Socket - T25.FeaturesMade in the USALimited lifetime warrantyBit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torque...

Proto® 1/4" Drive Impact Socket 5 mm - 6 Point 1/ea

PROTO Wr Comb 1-5/16 12 Pt Blac

Proto Black Oxide Combination Wrench 1-5/16" - 12 Point.FeaturesNon-reflective black oxide finish for use where non-plated products are required.12 point box end allows for fine indexing, helping to...

PROTO Flarenut Crowfoot Wr (P/N J4916HFL)

Proto 3/8" Drive Full Polish Flare Nut Crowfoot Wrench - 6 Point 1/2".FeaturesTypically used in low torque applications.Flare Nut Crowfoot wrenches are used in hard to reach or restricted access...

PROTO Skt Imp 3/8 Dr 11/16 6 Pt (P/N J7222H)

Proto 3/8" Drive Impact Socket 11/16" - 6 Point.FeaturesThe TorquePlus configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing...

PROTO Torque Wr Flex 3/8 Dr 10-100 Ft Lb

Proto 3/8" Drive Flex Head Micrometer Round Head Torque Wrench 10-100 Ft Lb.FeaturesAutomated calibration with +-4% clockwise and +-6% counter clockwise accuracy.Flex head to 17+ degrees each...

PROTO SKT IMP 1-1/2 DR 90MM 6 PT

PROTO Torque Multiplier 1200 Ft

Proto Torque Multiplier 1200 ft-lbs.FeaturesStandard torque accuracy is +/- 5% of reading.Maximum rated output: 1200 ft-lbs (1626 Nm).Maximum rated input: 200 ft-lbs (271 Nm).Reaction system: tubular...

PROTO Puller Rod Slide Acme Thr

Proto T-Handle Short Slide Rod.FeaturesThread Length (in): 10-3/4Length (in): 12-3/4Thread: 5/8"-12 ACMEShaft Diameter (in): 9/16

PROTO Wr Comb 10Mm 12 Pt-Teth

MADE TO ORDER (MTO) - contact us for lead timeProto Tether-Ready Satin Combination Wrench 10 mm - 12 Point.FeaturesSpecifically assembled with the correct Heat Shrink Loop.Satin finish provides...