DCD

Duct Puller 2-1/2" Duct (P/N 00616-250)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of...

Hanger - Double (P/N 32810-600)

One feature of the hangers is the ease with which they are assembled to either a sheave or a quadrant. A simple pin with a handle at one end and a locking pin at the other does the job. It should be...

Support Grip 0.75" - 1.12" Dia (P/N 00831-079)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Support Grip - Stainless Steel 2.00" - 2.49" Dia (P/N 00801-197S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Breakaway Pin Kit 400 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the...

Support Grip 3.00" - 3.49" Dia (P/N 00802-299)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Duct Puller 2" Duct (P/N 00616-200)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of...

Type 1 Pin Kit (P/N 00508-P020)

Sold Per 1 Each DCD 00508-P020 Type 1 Pin Kit Product Information: Pin Number: 00508-P020 Allen Key Size: 00101-187 (3/16") Type 1: 00508-120C, 00508-120D, 00508-130D, 00508-130E

Pulling Grip 1.50" - 1.99" Dia (P/N 00690-125)

Hand-woven by experienced tradespeople in order to guarantee a consistent level of high quality, DCD Pulling Grips enclose the cable firmly over the entire length of the mesh. They are made of high...

Duct-checker 8" Dia, Schedule 80 Duct (P/N 08500-880)

The Poly Duct Checker™ is designed to ensure the duct bore is clear before installing the cable or other utility. Following initial installation of the ducting, it is often found that debris or...

Support Grip 1.75" - 1.99" Dia (P/N 00802-173)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...

Support Grip - Stainless Steel 1.13" - 1.49" Dia (P/N 00830-118S)

Cable Support Grips are used for supporting any kind of cable in permanent installations. They can be used in either horizontal or vertical installations to relieve the cable weight from connections...