DCD

Breakaway Pin Kit 2,000 lb / 8.8 kN 5/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require...

Breakaway Pin Kit 340 lb, 10/kit

Originally, the DCD breakaway connectors were used by contractors installing gas ducting where it is critical to protect the duct from overload during installation. Many utilities now require the use...

Duct Plugger Kit 40 Mm Duct

2-1/2" Spreader Disc

Lube Spreader This two-part product is designed to spread DCD Tube-Lube® 346 (or similar) around the walls and along the length of the duct, while also acting as a connector. The body is...

Duct Puller 2" Duct

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and...

Dub-wise Puller 6" Duct

These products are designed to install polyethylene ducting using expanding jaws to grip the inside diameter of the duct while the outside diameter is prevented from stretching by a permanent...

2-1/2" Polyurethane Duct Puller

Duct Sleeve 140 Mm Duct

Duct Puller 63mm Duct

Duct Puller 40mm Duct

Clevis Pin Kit Maxi DUB-Swivel 275 Ton 1 Pin/Kit

Duct Plugger Kit 1-1/4" Duct