AMERICAN HDD

Barrel Reamer 18.5" Cut x 18.0" Pack, 4.25" Shaft Diameter, 2-7/8" IF (Box x Box) Mid-Grade

Standard - Hardfacing on high wear areas, internal baffles for strength and air tight float chamber and front and rear facing fluid jets.Mid-Grade - All of the STANDARD style features PLUS front...

Starter Rod Vermeer® Compatible Fits 20x22, 20x22 Series II - FST 1 #400 x QF #400***

*** QF #300, #400 & #460 are compatable with Vermeer® Quickfire #300, #400 & #460 connections.

Barrel Reamer 20.5" Cut x 20.0" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box x Box) Mid-Grade

Standard - Hardfacing on high wear areas, internal baffles for strength and air tight float chamber and front and rear facing fluid jets.Mid-Grade - All of the STANDARD style features PLUS front...

CLAY BACKREAMER 18" Cut x 3.25" Shaft Diameter, 2-3/8" REG (Box x Box) w/ Conical Teeth

Starter Rod Vermeer® Compatible Fits 16x20, 20x22 S III - FST 1 #250 x QF #400*** w/ Check Valve

*** QF #300, #400 & #460 are compatable with Vermeer® Quickfire #300, #400 & #460 connections.

SUB-SAVER VERMEER® COMPATIBLE Fits 24x40 Series II- 12.0" OAL - 2.375" pipe - #600

BALD EAGLE® Paddle Bit Vermeer® Compatible 7-Hole -- 1/2" x 13, 5.0" Width, 3/4" Thick

For Normal Soil Conditions

SUB-SAVER VERMEER® COMPATIBLE Fits 33x44, 36x50 - 2.375" pipe - #650

RIFLE® Paddle Bit Vermeer® Compatible 7-Hole -- 1/2" x 13, 4.5" Width, 3/4" Thick

CARBIDE HARDFACED CHISEL BITFor Sand & Sandy Loam

Barrel Reamer 13.5" Cut x 12.8" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box x Box) Mid-Grade

Standard - Hardfacing on high wear areas, internal baffles for strength and air tight float chamber and front and rear facing fluid jets.Mid-Grade - All of the STANDARD style features PLUS front...

WINGED BACKREAMER 18" Cut x 16.5" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box x Box) w/ Shark Teeth

A "Spider" center support and stabilizer ring are standard on 18" and larger reamers

Tail Piece (Housing Savers)/Adaptor Fits 4020 -- 2.40-4 (P) X 2.875" IF (P)