HDD Tooling, Parts & Supplies

Duct Puller 2-1/2" Duct (P/N 00616-250)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of polyurethane. This design change has been made to satisfy...

Duct Puller 2" Duct (P/N 00616-200)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of polyurethane. This design change has been made to satisfy...

Type 1 Pin Kit (P/N 00508-P020)

Sold Per 1 Each DCD 00508-P020 Type 1 Pin Kit Product Information: Pin Number: 00508-P020 Allen Key Size: 00101-187 (3/16") Type 1: 00508-120C, 00508-120D, 00508-130D, 00508-130E

Duct Puller 4" Duct (P/N 00620-400)

These products are designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct. This causes the pulling load to be spread around the circumference of the duct and allows a maximum load to be applied without damage to...

Duct Puller 5" Duct (P/N 00616-500)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of polyurethane. This design change has been made to satisfy...

DRIVE CHUCK DITCH WITCH ® COMPATIBLE Fits JT920, JT920L, 1.41-6 THD

Transmitter Housings w/ "Bolt-on Doors" Ditch Witch® Compatible (Slant Face) Bolt (large) for above Housing Covers - 1/2"-13 x 3/4" (3 req'd.) Bolt (small) for above Housing Covers - 3/8"-16 x 3/4" (1 req'd.)

Transmitter Housings with "Double Locking Door" Vermeer® Compatible (Slant Face) 3.250" Dia. Side Load, 6-Hole, Vermeer, #600 (Box)

DRIVE CHUCK VERMEER® COMPATIBLE Fits 24x40, 40X40 - 2.375" pipe - #600

STACKED PLATE SPIRAL FLUTED BACKREAMERS 14" Cut x 12" Pack, 3.25" Shaft Diameter, 2-3/8" REG x 15T Swivel (Box x Swivel) w/ Shark Teeth

DRIVE CHUCK DITCH WITCH ® COMPATIBLE Fits JT1720, JT1720M1, 1.69-6 THD

SEQUOIA® ROCK DRILLING BIT With Angle Cutters 5" cut with 2-7/8" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...