HDD Tooling, Parts & Supplies

Duct Puller 6" Duct (P/N 00616-600)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of polyurethane. This design change has been made to satisfy...

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 5.00" Dia. Hi-Flow, 3-1/2" API REG x 3-1/2" IF

Transmitter Housing Vermeer® Compatible 5.00" Dia., Box x Box Side Load Housing, 3.500" REG x 3.500" IF

Type 1 Pin Kit (P/N 00508-P220)

Sold Per 1 Each DCD 00508-P220 Type 1 Pin Kit Product Information: Pin Number: 00508-P220 Allen Key Size: 00101-375 (3/8") Type 1: 00508-1220

Duct Puller 1-1/2" Duct (P/N 00616-150)

The 00616/00617 series pullers were designed based on the older 00619 series pullers. After a customer request for a easier to handle puller we created a puller with a steel face plate instead of polyurethane. This design change has been made to satisfy...

WINGED BACKREAMER 16" Cut x 3.25" Shaft Diameter, 2-3/8" REG (Box x 15T Pulling Eye) w/ Shark Teeth

A "Spider" center support and stabilizer ring are standard on 18" and larger reamers

SEQUOIA® ROCK DRILLING BIT With Dome Cutters 4" cut with 2-3/8" API Reg Pin

American HDD® Rock Bits are designed for easy cutting and steering in soft and medium-hard rock. The large face aids in steering while the carbide rubble hard-facing and carbide cutters and wear buttons,insure long service life. Pick the Extreme Series...

AMERICAN HDD® Tail Piece (Housing Savers)/Adaptor 2.125 LPT (Pin) x #600 Firestick (Pin) with HD 5/8" bolt

SEQUOIA® ROCK DRILLING BIT With Chisel Cutters 6" cut with 2.5" spline TRIHAWK® Compatible

DIRT SUBS FOR BOX END TRANSMITTER HOUSING(Blade Adapters) Vermeer® Compatible 6 bolt (1/2" - 13) 2" IF PIN, FOR 3-1/4" DIAMETER HOUSING

End Load Rock Housings accepts 15" or 19" Digitrak Transmitters 6.375" Dia. Hi-Flow, 4-1/2" API REG x 4-1/2" IF

STACKED PLATE SPIRAL FLUTED BACKREAMERS 14" Cut x 12" Pack, 3.25" Shaft Diameter, 2-3/8" REG (Box) x 15T Swivel w/ Conical Teeth