Product Description
Sold Per 1 Each GMP B Sheave Support Product Information:This device is used to guide self-support cable, pre-lashed cable or ADSS (All-Dielectric Self-Supporting Cable) through on a pole line. It is designed to be a permanent (or temporary) piece of pole line hardware that remains in plant
Save many hours by eliminating the need to use lashing wire clamps, lashed supports, spacers or cable guards and by not having to retrieve temporary frames and blocks
Designed primarily for straight line poles
Can accommodate up to two OD Cables with messenger
It is recommended for use where grade changes are between 20-50% on messenger sizes of 6 M or 6.6M or when grade changes are between 20-30% on 10M messenger or larger
It can be used on small corners up to 20' of pull is present and there is no more than 50% of grade change
For upward grade changes, the sheave should be inverted
Use appropriate Strain Relief Strap when using 10M strand or larger and when there is a downward grade change at the pole
Use 5/8" Through Bolt and 5/16"x4" Lag Bolt. When using Strain Relief Straps, use and additional 5/8" Through Bolt or a 5/16"x4" Lag Screw for the Straps. Do not use a Lag Screw if closer than 4" to the top of a pole Weight: 6 lbs. (3kgs)
